Netafim Spinnet Sprinklers
These are ideal for use when dropping sprinklers from above
SPINNET™
BRIDGELESS MICRO-SPRINKLER
APPLICATIONS
Greenhouses, Nurseries, Net-houses.
SPECIFICATIONS
■ Bridgeless design.
■ Micro-sprinkler, 6 different flow rates: 50, 70, 90, 120, 160, 200 l/h.
Nominal flow rates at 2.3 bar pressure.
■ Recommended working pressure: 2.0 up to 3.0 bar.
■ Recommended filtration : 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydro-cyclone filter is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team's
instructions.
■ Inlet connector: Press fit.
■ 3 different rotors:
LR - High trajectory, colored Green
FLT - Flat distributor, colored Gray
SR - Low trajectory , colored Blue
■ SpinNet™ micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards
Institute (SII).
FEATURES AND BENEFITS
■ SpinNet™ micro-sprinklers are constructed without a "bridge" to retain the spinner, producing a drip-less operation.
This means that plants located below the sprinklers are not damaged from water dripping off the sprinkler. SpinNet™
hangs below the supply pipe preventing wetting of the pipe and dripping onto the plants below.
■ Interchangeable components. SpinNet™ micro-sprinklers can be disassembled by hand should they need cleaning -
no tools are required.
■ Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system
can be cleaned by application of suitable acid treatments.
■ Excellent uniformity distribution on a full coverage irrigation system.
■ Strongly recommended to connect the SpinNet™ to the distribution pipe with a SSPE (super soft PE) micro-tube, a
specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage.