Hansen Leveller Valve

Hansen Leveller Valve Enables you to set a minimum/maximum water level when filling your tank 

The Hansen Leveller valve enables you to set a maximum and a minimum fill level to your tank.  This is a great product to use on your mains or emergency water fill when combined with rainwater harveting.

It can also be used to prevent multiple starts and stops on  a supply pump so that if your tank is being filled from a sump or a well then the fill can be delayed until the water level reaches a low point and the pump will continue to fill until the water level reaches the high level.  

• Lengthen your Pump’s Life with Less on/off Cycles
• Prevent Pump Burnout caused by Dry Tank Syndrome
• Combine with Rain Harvesting to take advantage of Natures Reserves
• High performance, cost effective Reservoir/Tank valve.made from Glass Reinforced Nylon 
• Adjustable minimum and maximum on/off control (50mm - 2.5 metre).
• Suitable for high/low pressures (0.2 Bar - 12 Bar).
• Delivers high volumes of water quickly with unrestrictive full flow (1275 l/min at 12 Bar).
• Patent Pending "self-cleaning pilot" for use in clean/dirty water conditions.
• Soft open and close action, preventing valve bounce and water hammer.
• Strong, compact design.
• Threaded outlet for use with a diffuser tube, ideal for high flows, eliminating turbulence.
• Punch out anti-syphon holes for multi tank filling or diffuser installations.
• Manufactured from strong, non-corrosive UV stabilised materials.
• Valve supplied with glass fibre reinforced nylon valve body and 11/4" 11/5" and 2" BSP  standard adaptors, leveller control, 115mm weighted HiViz Threaded Ball, 140mm blue threaded float, 2.5 metre cord.